Preparing the Lampe Berger Burner

Before using the Lampe Berger burner, it is important to make the proper preparations. Start by removing the decorative cap and the sealing cap from the burner. Next, fill the Lampe Berger burner two-thirds full with a Lampe Berger fragrance liquid of your choice. Use the funnel provided to prevent spills. Then place the wick with the stone back in the burner and let it soak for about 20 minutes so that the wick becomes fully saturated with the fragrance liquid.

Activating the Lampe Berger Burner

After the liquid has soaked in, it is time to activate the Lampe Berger burner. Light the stone with a lighter or match. Let the flame burn for about 2 minutes; this will ensure that the stone gets properly hot. After 2 minutes, gently blow out the flame. The stone will now continue to glow and begin to diffuse the fragrance liquid. Place the decorative cap back over the glowing stone to regulate the diffusion of the fragrance.

Switching off the burner

When you have reached the desired fragrance strength or after up to 30 minutes of use, you can turn off the Lampe Berger burner. Remove the decorative cap and place the sealing cap directly over the stone. This stops the evaporation process and extinguishes the burner. Allow the burner to cool before storing or moving it again. By using the sealing cap, you ensure that the fragrance liquid lasts longer and that the stone is ready for its next use.